Backing Rings
DESCRIPTIONA backing ring is a circular metal ring, with holes around the perimeter, used in pairs to bolt two HDPE pipe spools together. This allows lengths of PE pipe to be disconnected and re-connected, for inspection, replacement or relocation. The internal diameter of the backing ring should always be slightly larger than the outside diameter of the HDPE pipe.
These metal backing rings allow the two ends of a pipe to be joined with bolts. Also known as back up plates, backing rings hold the pipeline tightly to a valve or fitting and are often required for high-pressure pipe applications. FHS Poly can supply galvanised or Stainless Steel backing rings.
DETAILSSizes: 25-1200mm
Material: Galvanised or Stainless Steel
Table D, E, D/E, F, Ansi 150
AS4087, AS2129
Pressure Rating: Pn10, Pn16, Pn21
Long and short spigots available
Made from 100% Polyethylene PE100
Other sizes and specifications available on request.
FHS Poly - Poly Solution ExpertsAustralia and overseas delivery available.
Enquire here to contact our team for more information on price and availability.
DESCRIPTIONA backing ring is a circular metal ring, with holes around the perimeter, used in pairs to bolt two HDPE pipe spools together. This allows lengths of PE pipe to be disconnected and re-connected, for inspection, replacement or relocation. The internal diameter of the backing ring should always be slightly larger than the outside diameter of the HDPE pipe.
These metal backing rings allow the two ends of a pipe to be joined with bolts. Also known as back up plates, backing rings hold the pipeline tightly to a valve or fitting and are often required for high-pressure pipe applications. FHS Poly can supply galvanised or Stainless Steel backing rings.
DETAILSSizes: 25-1200mm
Material: Galvanised or Stainless Steel
Table D, E, D/E, F, Ansi 150
AS4087, AS2129
Pressure Rating: Pn10, Pn16, Pn21
Long and short spigots available
Made from 100% Polyethylene PE100
Other sizes and specifications available on request.
FHS Poly - Poly Solution ExpertsAustralia and overseas delivery available.
Enquire here to contact our team for more information on price and availability.
DESCRIPTIONA backing ring is a circular metal ring, with holes around the perimeter, used in pairs to bolt two HDPE pipe spools together. This allows lengths of PE pipe to be disconnected and re-connected, for inspection, replacement or relocation. The internal diameter of the backing ring should always be slightly larger than the outside diameter of the HDPE pipe.
These metal backing rings allow the two ends of a pipe to be joined with bolts. Also known as back up plates, backing rings hold the pipeline tightly to a valve or fitting and are often required for high-pressure pipe applications. FHS Poly can supply galvanised or Stainless Steel backing rings.
DETAILSSizes: 25-1200mm
Material: Galvanised or Stainless Steel
Table D, E, D/E, F, Ansi 150
AS4087, AS2129
Pressure Rating: Pn10, Pn16, Pn21
Long and short spigots available
Made from 100% Polyethylene PE100
Other sizes and specifications available on request.
FHS Poly - Poly Solution ExpertsAustralia and overseas delivery available.
Enquire here to contact our team for more information on price and availability.